![]() Helmets must be always worn while on the racing surface. Must be certified no older 4 years old.Ī Snell SA-approved helmet with no earlier than a SA2010 certification is required and must still have a certification tag inside. HANS, NecksGen, or similar device is MANDATORY. Must have 5 point belts minimum within 3 yearsĪll fuel lines must be marked if in cabin must be enclosedįuel cells mandatory must have their own brackets and cans.Īll lead must be painted white with car number Must have racing seat, Full containment mandatory Must have a front windshield that can be glass or Lexan. Doors may be skinned.Ĥ point cage is mandatory. Downforce, shovel, or dirt late model bumper covers are not allowed. Stock appearing bumpers and covers, including made for oval racing or aftermarket covers, may be used if the shape, size, or style resembles the factory parts. Factory rear quarters mandatory aluminum doors and front fenders permitted. Stock or stock appearing body panels must be used. All cars are required to have a front bumper cover, hood, both front fenders, windshield, all doors, (2 or 4 depending on model) both quarter panels, deck lid (must enclose trunk area), and a rear bumper cover. Must use factory style suspension, no switching to 3 link/4 link/or dbl wishbone if not factory equippedĪftermarket A-Arms permitted for camber adjustmentĬoilovers Allowed, NO DAMPING ADJUSTMENT ALLOWEDīODY All exterior trim, including lights, body moldings, mirrors, etc… must be removed. Hoosier racing tires only 790 or 800 compounds. DOHC 2250, 6 CYL FWD and K-Series 2450, Maximum Weight rule 2750.ĥ5% Left Side Percentage FWD or RWD allowedħ3 inch width measured at the outside bead. Transmission must match chassis manufacturer ![]() Any Throttle Body Any Injector 350 CFM MAX CARB. 16V stock intake manifold, 8V any intake manifold. No mixing and matching of VTEC heads/blocks. No fabricated manifold plenums are allowed. Single overhead cam cars will be allowed aftermarket intakes and dual overhead cam cars will have to run stock intakes for the engine make. The throttle body must be attached to the intake manifold at the stock location. ![]() (Example: A V6 truck engine in a Dodge Neon is not allowed). No engine swaps of non-stock engine types from other makes or models of vehicles are allowed. Cylinder heads must be a stock type casting for the engine type and original displacement used (Example: No aftermarket heads). Cars must use an OEM engine type and brand matching the make of the car (Example: any Honda Civic engine in a Honda Accord is allowed). The maximum displacement for six cylinders is 3.5 liters. Six-cylinder engines must be SOHC or pushrod only. Maximum displacement is 2.5 on all four-cylinder engines. OEM stock variable cam timing is allowed on all four cylinders displacing 2.5 liters or less only. Four-cylinder engines may be pushrod, SOHC, or DOHC. No chemical power adders of any kind (nitrous oxide, benzene, nitromethane, etc.) are allowed. ENGINE and TRANSMISSIONS Four- or Six-cylinders engines only.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |